English  |
1. PIPE METERIAL
● Cold and hot rolled carbon steel
● Low and high resistance carbon steel
● Galvanized, galvanized aluminium, aluminized steel
● Stainless steel
● Aluminium
● Copper
2. APPLICATION
ERW Carbon Steel Tube Mills |  |
2.MODELS
Model | Round Tube | |
O.D(mm) | Thickness (mm) | |
HT32 | Φ12~Φ32 | 0.5~2.5 |
HT60 | Φ12~Φ63 | 0.6~3 |
HT76 | Φ25~Φ76 | 1~4 |
HT89 | Φ32~Φ89 | 1.5~4.5 |
HT127 | Φ48~Φ127 | 1.5~5 |
HT165 | Φ60~Φ165 | 2~6 |
HT254 | Φ114~Φ254 | 3~8 |
HT273 | Φ114~Φ273 | 4~10 |
HT325 | Φ165~Φ325 | 4~12 |
HT426 | Φ165~Φ426 | 6~14 |
HT508 | Φ165~Φ508 | 6~16 |
HT630 | Φ325~Φ630 | 6~20 |
Note: the above models are for reference, can be customized according to requirements.
3. FEATURESE
● High strength.
● High speed.
● Cold cutting mode, no burr at tube end.
● The further end facing and chamfering is not required.
● The deformation of tube end and changes in metallography structure is not caused by cutting.
● Cut off length with high accuracy, the second cutting length is not required.
● The wastage blade is low, so the production cost is low.
● The rotating speed of blade is low, the safety performance is high.
● The servo following cut off length and full digital control system is provided.
● International General Standard Spare Parts are used, which can facilitate customer to purchase the same spare parts at local market.
4. OUR SERVICES
● Provide integral solutions.
● Provide customized solutions.
● Provide equipment modification and upgrade services.
● Provide turnkey projects.
● Provide free technical consultation.
● Provide performance testing before shipment.
● Provide remote fast fault diagnosis and resolution.
● Provide fast supply spare parts.
 |  |  |
 |  |  |
 |  |  |
1. PIPE METERIAL
● Cold and hot rolled carbon steel
● Low and high resistance carbon steel
● Galvanized, galvanized aluminium, aluminized steel
● Stainless steel
● Aluminium
● Copper
2. APPLICATION
ERW Carbon Steel Tube Mills | |
2.MODELS
Model | Round Tube | |
O.D(mm) | Thickness (mm) | |
HT32 | Φ12~Φ32 | 0.5~2.5 |
HT60 | Φ12~Φ63 | 0.6~3 |
HT76 | Φ25~Φ76 | 1~4 |
HT89 | Φ32~Φ89 | 1.5~4.5 |
HT127 | Φ48~Φ127 | 1.5~5 |
HT165 | Φ60~Φ165 | 2~6 |
HT254 | Φ114~Φ254 | 3~8 |
HT273 | Φ114~Φ273 | 4~10 |
HT325 | Φ165~Φ325 | 4~12 |
HT426 | Φ165~Φ426 | 6~14 |
HT508 | Φ165~Φ508 | 6~16 |
HT630 | Φ325~Φ630 | 6~20 |
Note: the above models are for reference, can be customized according to requirements.
3. FEATURESE
● High strength.
● High speed.
● Cold cutting mode, no burr at tube end.
● The further end facing and chamfering is not required.
● The deformation of tube end and changes in metallography structure is not caused by cutting.
● Cut off length with high accuracy, the second cutting length is not required.
● The wastage blade is low, so the production cost is low.
● The rotating speed of blade is low, the safety performance is high.
● The servo following cut off length and full digital control system is provided.
● International General Standard Spare Parts are used, which can facilitate customer to purchase the same spare parts at local market.
4. OUR SERVICES
● Provide integral solutions.
● Provide customized solutions.
● Provide equipment modification and upgrade services.
● Provide turnkey projects.
● Provide free technical consultation.
● Provide performance testing before shipment.
● Provide remote fast fault diagnosis and resolution.
● Provide fast supply spare parts.
| | |
| | |
| | |
